receive cmd from esp, parsing no working yet

ADIS_Sumo_Styger/Sumo/Remote.c

@@ -12,6 +12,7 @@
 #include "Shell.h"
 #include "Buzzer.h"
 #include "McuESP32.h"
+#include "McuLog.h"
 
 /*! \todo ADIS: This is a (mostly empty) template where the remote commands from the ESP32 could be handled. This module should be extended to send data back to the ESP32 */
 
@@ -30,7 +31,11 @@ void REMOTE_GatewayRxFromESP(unsigned char ch) {
 static void RemoteTask(void *pv) {
   unsigned char ch;
   BaseType_t res;
-
+  unsigned char espMsg[McuShell_DEFAULT_SHELL_BUFFER_SIZE] = "";
+  const char espMsgPrefix[] = "@robot:cmd ";
+  const char espMsgPostfix[] = "!\r\n";
+  uint8_t saveChar = 0;
+  uint8_t writeIndex = 0;
   (void)pv; /* not used */
 #if 0 /* example making a beep */
   BUZ_Beep(200, 500);
@@ -55,13 +60,39 @@ static void RemoteTask(void *pv) {
     res = xQueueReceive(REMOTE_RxFromESP_Queue, &ch, pdMS_TO_TICKS(10)); /* wait max 10 ms */
     if (res==errQUEUE_EMPTY) {
 	    ch = '\0'; /* nothing received */
+
     }
     else if(res == pdPASS) {
     	/* something was received */
     	/* handle remote stream from ESP */
+//    	uint8_t mCh = (uint8_t)ch;
+//    	uint8_t mCh[10] = "Char: ";
+//    	unsigned char newLine = '\n';
+//    	McuUtility_strcat(mCh, 10, &ch);
+//    	McuUtility_strcat(mCh, 10, &newLine);
+//    	McuShell_SendStr(mCh, McuShell_GetStdio()->stdOut);
         if(ch == '@'){
+        	saveChar = 1;
+        	writeIndex = 0;
         	BUZ_Beep(200, 500);
         }
+        if(saveChar == 1){
+        	espMsg[writeIndex++] = ch;
+        }
+        if(ch == '!' && saveChar == 1){
+        	saveChar = 0;
+        	McuShell_SendStr(espMsg, McuShell_GetStdio()->stdOut);
+        	McuShell_SendStr((uint8_t*)" okok.\r\n", McuShell_GetStdio()->stdOut);
+          	if (McuUtility_strncmp(espMsg, espMsgPrefix, sizeof(espMsgPrefix)-1)==0) { /* check prefix */
+          		unsigned char recCmd[32] = {0};
+          		memmove(recCmd,espMsg[11],writeIndex);
+          		McuShell_SendStr(recCmd, McuShell_GetStdio()->stdOut);
+        	}
+        }else if(writeIndex == McuShell_DEFAULT_SHELL_BUFFER_SIZE && saveChar == 1){
+        	saveChar = 0;
+        	McuShell_SendStr(espMsg, McuShell_GetStdio()->stdOut);
+        	McuShell_SendStr((uint8_t*)" Error in cmd.\r\n", McuShell_GetStdio()->stdOut);
+        }
     }
   }
 }

ADIS_Sumo_Styger/source/IncludeMcuLibConfig.h

@@ -31,6 +31,13 @@
 #define McuShell_CONFIG_MULTI_CMD_SIZE              (96) /* maximum size of a single command in a multi-command string */
 #define McuShell_CONFIG_PROMPT_STRING               "ROBO> "
 #define McuShell_CONFIG_ECHO_ENABLED                (1)
+
+/* Mcu log */
+#define McuLog_CONFIG_IS_ENABLED    (1)
+#define McuLog_CONFIG_USE_RTT_CONSOLE         (1)
+#define McuLog_CONFIG_LOG_TIMESTAMP_DATE    (0)  // disable since time is not used
+#define McuLog_CONFIG_LOG_TIMESTAMP_TIME    (0)
+
 /* ---------------------------------------------------------------------------------------*/
 /* I2C and OLED */
 //#define CONFIG_I2C_USE_PORT_B     (1) /* tinyK22: PTB0, PTB1 */