implemented GPIO Raspi Shutdown indicator,

added documentation for dtoverlay

ADIS_tinyK22_RpiHat/raspi-overlayconfig.txt

@@ -1,11 +1,17 @@
 To use GPIO shutdown for the Raspberry Pi, add following lines in the file /boot/config.txt
+- Only one signal can be used (only one gpio-poweroff)
+- When gpio-poweroff and gpio-shutdown is used, the gpio-shutdown can only shutdown the Pi, not start
+- When only gpio-shutdown is used, the gpio-shutdown can also start the Pi
 edit file: sudo nano /boot/config.txt
 
 # signal power off with green led
 dtoverlay=gpio-poweroff,gpiopin=16
 
+# signal power off to GPIO GP1 pin
+dtoverlay=gpio-poweroff,gpiopin=18
+
 # shutdown Pi when joystick button is pressed
-dtoverlay=gpio-shutdown,gpio_pin=26,gpio-pull=up
+dtoverlay=gpio-shutdown,gpio_pin=26,gpio_pull=up
 
 # shutdown Pi when GPIO GP0 on Hat is set to low
-dtoverlay=gpio-shutdown,gpio_pin=17
+dtoverlay=gpio-shutdown,gpio_pin=17,gpio_pull=up

ADIS_tinyK22_RpiHat/source/application.c

@@ -23,6 +23,7 @@
 /* vars */
 static McuLED_Handle_t LED_blue;
 static McuGPIO_Handle_t GPIO_PowerRaspi;
+static McuGPIO_Handle_t GPIO_RaspiShutdownIndicator;
 static uint32_t taskParameter1 = 5;
 static TaskHandle_t appTaskHandle = NULL;
 static QueueHandle_t eventQueueHandle = NULL;
@@ -41,13 +42,26 @@ void App_Init(void){
 	config.hw.pin = LED_BLUE_PIN;
 	LED_blue = McuLED_InitLed(&config);
 
-	/* configure gpio raspi power disable */
+	/* configure gpio raspi power off GPIO  (GP_0)*/
-	McuGPIO_Config_t config_gpio;
+	McuGPIO_Config_t config_gp0;
-	McuGPIO_GetDefaultConfig(&config_gpio);
+	McuGPIO_GetDefaultConfig(&config_gp0);
-	config_gpio.hw.gpio = GPIOA;
+	config_gp0.hw.gpio = GPIOA;
-	config_gpio.hw.port = PORTA;
+	config_gp0.hw.port = PORTA;
-	config_gpio.hw.pin = 1U;
+	config_gp0.hw.pin = 1U;
-	GPIO_PowerRaspi = McuGPIO_InitGPIO(&config_gpio);
+	config_gp0.isInput = false;      // Output
+	config_gp0.isHighOnInit = true;  // active low
+	config_gp0.hw.pull = McuGPIO_PULL_DISABLE;  // disable pull
+	GPIO_PowerRaspi = McuGPIO_InitGPIO(&config_gp0);
+
+	/* configure gpio raspi shutdown indicator  (GP_1) */
+	McuGPIO_Config_t config_gp1;
+	McuGPIO_GetDefaultConfig(&config_gp1);
+	config_gp1.hw.gpio = GPIOA;
+	config_gp1.hw.port = PORTA;
+	config_gp1.hw.pin = 2U;
+	config_gp1.isInput = true;       // input
+	config_gp1.hw.pull = McuGPIO_PULL_DISABLE;  // disable pull
+	GPIO_RaspiShutdownIndicator = McuGPIO_InitGPIO(&config_gp1);
 
 	// get the event queue handle from debounce
 	eventQueueHandle = Debounce_GetEventQueueHandle();
@@ -57,9 +71,11 @@ void App_Init(void){
 static void App_Task(void* pv){
 	McuLog_info("Application Task starting");
 
-	Debounce_event_e event = Event_None;
 
     while(1){
+
+    	Debounce_event_e event = Event_None;
+
     	// get event data from queue if it can be reached
     	if(eventQueueHandle != NULL)
     	{
@@ -67,12 +83,21 @@ static void App_Task(void* pv){
     		xQueueReceive(eventQueueHandle, &event, pdMS_TO_TICKS(20));
     	}
 
-    	if(event == Button_Center_Pressed){
+    	// turn off raspberry pi if requested by button press
+    	if(event == Button_Up_Pressed){
     		McuGPIO_SetLow(GPIO_PowerRaspi);
-    		vTaskDelay(pdMS_TO_TICKS(5000));
+    		vTaskDelay(pdMS_TO_TICKS(1000));
     		McuGPIO_SetHigh(GPIO_PowerRaspi);
     	}
 
+    	// turn on led if the power off indicator is on (Raspi is shut down)
+    	if(McuGPIO_IsHigh(GPIO_RaspiShutdownIndicator)){
+    		McuLED_On(LED_blue);
+    	}else{
+    		McuLED_Off(LED_blue);
+    	}
+
+
     	vTaskDelay(pdMS_TO_TICKS(100));
     }
 }

ADIS_tinyK22_RpiHat/source/platform.c

@@ -25,7 +25,6 @@ void PL_Init(void){
     CLOCK_EnableClock(kCLOCK_PortA);
     CLOCK_EnableClock(kCLOCK_PortB);
     CLOCK_EnableClock(kCLOCK_PortC);
-    CLOCK_EnableClock(kCLOCK_PortD);
 
 	McuLib_Init();
 	McuRTOS_Init();