jonas
/
ASYD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
37 Commits
2 Branches
0 Tags
5.5 MiB
 
 
Tag: Branch: Tree: devel_freefall
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'devel_freefall'
${ noResults }
ASYD/ASYD_Trends/LPC804_LowPower/board/pin_mux.c

423 lines
20 KiB
Raw Permalink Blame History

/***********************************************************************************************************************
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
**********************************************************************************************************************/
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v13.0
processor: LPC804
package_id: LPC804M101JDH20
mcu_data: ksdk2_0
processor_version: 13.0.1
board: LPCXpresso804
pin_labels:
- {pin_num: '9', pin_signal: PIO0_11/ADC_6/WKTCLKIN, label: 'CN6[10]/CN8[3]/D4/PIO0_11/M_PIO0_11', identifier: LED_BLUE}
- {pin_num: '4', pin_signal: PIO0_12, label: 'S2/CN8[6]/CN6[5]/D3/M_PIO0_12/PIO0_12', identifier: LED_GREEN;S2}
- {pin_num: '3', pin_signal: PIO0_13/ADC_10, label: 'S1/CN8[4]/CN6[4]/D2/M_PIO0_13/PIO0_13', identifier: LED_RED;S1}
- {pin_num: '19', pin_signal: PIO0_0/ACMP_I1, label: 'CN7[3]/CN8[8]/JP2/PIO0_0', identifier: DEBUG_UART_RX}
- {pin_num: '6', pin_signal: PIO0_4/ADC_11, label: 'CN6[7]/CN8[7]/CN5[5]/JP24/PIO0_4', identifier: DEBUG_UART_TX}
- {pin_num: '8', pin_signal: SWDIO/PIO0_2, label: 'CN6[9]/CN1[2]/U1[17]/SWDIO_PIO0_2', identifier: DEBUG_SWD_SWDIO}
- {pin_num: '7', pin_signal: SWCLK/PIO0_3, label: 'CN6[8]/CN1[4]/U1[16]/SWCLK_PIO0_3', identifier: DEBUG_SWD_SWDCLK}
- {pin_num: '20', pin_signal: PIO0_14/ACMP_I3/ADC_2, label: 'CN7[2]/CN3[1]/JP4/PIO0_14', identifier: I2C_SCL}
- {pin_num: '17', pin_signal: PIO0_7/ADC_1/ACMPVREF, label: 'CN7[5]/CN3[2]/JP23/CN5[4]/PIO0_7', identifier: I2C_SDA}
- {pin_num: '5', pin_signal: RESETN/PIO0_5, label: 'CN6[6]/CN1[10]/S3/CN4[3]/U1[3]/U1[8]/TRST_P0_5', identifier: DEBUG_SWD_RESETN}
- {pin_num: '1', pin_signal: PIO0_16/ACMP_I4/ADC_3, label: 'CN6[2]/CN5[2]/U4[1]/PIO0_16'}
- {pin_num: '2', pin_signal: PIO0_17/ADC_9, label: 'CN6[3]/CN5[3]/PIO0_17'}
- {pin_num: '10', pin_signal: PIO0_10/ADC_7, label: 'CN6[11]/VR1/CN5[1]/PIO0_10'}
- {pin_num: '12', pin_signal: PIO0_1/ADC_0/ACMP_I2/CLKIN, label: 'CN7[10]/CN3[5]/CN5[6]/U4[6]/PIO0_1'}
- {pin_num: '13', pin_signal: PIO0_9/ADC_4, label: 'CN7[9]/CN3[6]/R13/U4[2]/PIO0_9/ISP_U0_TXD_DS'}
- {pin_num: '11', pin_signal: PIO0_15/ADC_8, label: 'CN7[11]/CN3[8]/PIO0_15'}
- {pin_num: '14', pin_signal: PIO0_8/ADC_5, label: 'CN7[8]/CN3[7]/R20/U4[5]/PIO0_8/ISP_U0_RXD_DS'}
- {pin_num: '15', pin_signal: VDD, label: 'CN7[7]/JP5/R37/VDD'}
- {pin_num: '16', pin_signal: VSS, label: GND}
- {pin_num: '18', pin_signal: VREFP, label: 'CN7[4]/JP7/MCU_VREFP'}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
#include "fsl_common.h"
#include "fsl_gpio.h"
#include "fsl_iocon.h"
#include "fsl_swm.h"
#include "pin_mux.h"
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitBootPins
* Description : Calls initialization functions.
*
* END ****************************************************************************************************************/
void BOARD_InitBootPins(void)
{
BOARD_InitPins();
BOARD_InitDEBUG_UARTPins();
}
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list: []
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
/* Function assigned for the Cortex-M0P */
void BOARD_InitPins(void)
{
}
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitLEDsPins:
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
- pin_list:
- {pin_num: '9', peripheral: GPIO, signal: 'PIO0, 11', pin_signal: PIO0_11/ADC_6/WKTCLKIN, direction: OUTPUT, mode: pullUp, invert: disabled, hysteresis: enabled,
opendrain: disabled}
- {pin_num: '4', peripheral: GPIO, signal: 'PIO0, 12', pin_signal: PIO0_12, identifier: LED_GREEN, direction: OUTPUT, mode: pullUp, invert: disabled, hysteresis: enabled,
opendrain: disabled}
- {pin_num: '3', peripheral: GPIO, signal: 'PIO0, 13', pin_signal: PIO0_13/ADC_10, identifier: LED_RED, direction: OUTPUT, mode: pullUp, invert: disabled, hysteresis: enabled,
opendrain: disabled}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitLEDsPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
/* Function assigned for the Cortex-M0P */
void BOARD_InitLEDsPins(void)
{
/* Enables clock for IOCON.: enable */
CLOCK_EnableClock(kCLOCK_Iocon);
/* Enables the clock for the GPIO0 module */
CLOCK_EnableClock(kCLOCK_Gpio0);
gpio_pin_config_t LED_BLUE_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U,
};
/* Initialize GPIO functionality on pin PIO0_11 (pin 9) */
GPIO_PinInit(BOARD_INITLEDSPINS_LED_BLUE_GPIO, BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, &LED_BLUE_config);
gpio_pin_config_t LED_GREEN_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U,
};
/* Initialize GPIO functionality on pin PIO0_12 (pin 4) */
GPIO_PinInit(BOARD_INITLEDSPINS_LED_GREEN_GPIO, BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, &LED_GREEN_config);
gpio_pin_config_t LED_RED_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U,
};
/* Initialize GPIO functionality on pin PIO0_13 (pin 3) */
GPIO_PinInit(BOARD_INITLEDSPINS_LED_RED_GPIO, BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, &LED_RED_config);
const uint32_t LED_BLUE = (/* Selects pull-up function */
IOCON_PIO_MODE_PULLUP |
/* Enable hysteresis */
IOCON_PIO_HYS_EN |
/* Input not invert */
IOCON_PIO_INV_DI |
/* Disables Open-drain function */
IOCON_PIO_OD_DI);
/* PIO0 PIN11 (coords: 9) is configured as GPIO, PIO0, 11. */
IOCON_PinMuxSet(IOCON, IOCON_INDEX_PIO0_11, LED_BLUE);
const uint32_t LED_GREEN = (/* Selects pull-up function */
IOCON_PIO_MODE_PULLUP |
/* Enable hysteresis */
IOCON_PIO_HYS_EN |
/* Input not invert */
IOCON_PIO_INV_DI |
/* Disables Open-drain function */
IOCON_PIO_OD_DI);
/* PIO0 PIN12 (coords: 4) is configured as GPIO, PIO0, 12. */
IOCON_PinMuxSet(IOCON, IOCON_INDEX_PIO0_12, LED_GREEN);
const uint32_t LED_RED = (/* Selects pull-up function */
IOCON_PIO_MODE_PULLUP |
/* Enable hysteresis */
IOCON_PIO_HYS_EN |
/* Input not invert */
IOCON_PIO_INV_DI |
/* Disables Open-drain function */
IOCON_PIO_OD_DI);
/* PIO0 PIN13 (coords: 3) is configured as GPIO, PIO0, 13. */
IOCON_PinMuxSet(IOCON, IOCON_INDEX_PIO0_13, LED_RED);
}
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitDEBUG_UARTPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
- {pin_num: '19', peripheral: USART0, signal: RXD, pin_signal: PIO0_0/ACMP_I1, mode: pullUp, invert: disabled, hysteresis: enabled, opendrain: disabled}
- {pin_num: '6', peripheral: USART0, signal: TXD, pin_signal: PIO0_4/ADC_11, mode: pullUp, invert: disabled, hysteresis: enabled, opendrain: disabled}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitDEBUG_UARTPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
/* Function assigned for the Cortex-M0P */
void BOARD_InitDEBUG_UARTPins(void)
{
/* Enables clock for IOCON.: enable */
CLOCK_EnableClock(kCLOCK_Iocon);
/* Enables clock for switch matrix.: enable */
CLOCK_EnableClock(kCLOCK_Swm);
const uint32_t DEBUG_UART_RX = (/* Selects pull-up function */
IOCON_PIO_MODE_PULLUP |
/* Enable hysteresis */
IOCON_PIO_HYS_EN |
/* Input not invert */
IOCON_PIO_INV_DI |
/* Disables Open-drain function */
IOCON_PIO_OD_DI);
/* PIO0 PIN0 (coords: 19) is configured as USART0, RXD. */
IOCON_PinMuxSet(IOCON, IOCON_INDEX_PIO0_0, DEBUG_UART_RX);
const uint32_t DEBUG_UART_TX = (/* Selects pull-up function */
IOCON_PIO_MODE_PULLUP |
/* Enable hysteresis */
IOCON_PIO_HYS_EN |
/* Input not invert */
IOCON_PIO_INV_DI |
/* Disables Open-drain function */
IOCON_PIO_OD_DI);
/* PIO0 PIN4 (coords: 6) is configured as USART0, TXD. */
IOCON_PinMuxSet(IOCON, IOCON_INDEX_PIO0_4, DEBUG_UART_TX);
/* USART0_TXD connect to P0_4 */
SWM_SetMovablePinSelect(SWM0, kSWM_USART0_TXD, kSWM_PortPin_P0_4);
/* USART0_RXD connect to P0_0 */
SWM_SetMovablePinSelect(SWM0, kSWM_USART0_RXD, kSWM_PortPin_P0_0);
/* Disable clock for switch matrix. */
CLOCK_DisableClock(kCLOCK_Swm);
}
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitSWD_DEBUGPins:
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
- pin_list:
- {pin_num: '7', peripheral: SWD, signal: SWCLK, pin_signal: SWCLK/PIO0_3, mode: pullUp, invert: disabled, hysteresis: enabled, opendrain: disabled}
- {pin_num: '8', peripheral: SWD, signal: SWDIO, pin_signal: SWDIO/PIO0_2, mode: pullUp, invert: disabled, hysteresis: enabled, opendrain: disabled}
- {pin_num: '5', peripheral: SYSCON, signal: RESETN, pin_signal: RESETN/PIO0_5, mode: pullUp, invert: disabled, hysteresis: enabled, opendrain: disabled}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitSWD_DEBUGPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
/* Function assigned for the Cortex-M0P */
void BOARD_InitSWD_DEBUGPins(void)
{
/* Enables clock for IOCON.: enable */
CLOCK_EnableClock(kCLOCK_Iocon);
/* Enables clock for switch matrix.: enable */
CLOCK_EnableClock(kCLOCK_Swm);
const uint32_t DEBUG_SWD_SWDIO = (/* Selects pull-up function */
IOCON_PIO_MODE_PULLUP |
/* Enable hysteresis */
IOCON_PIO_HYS_EN |
/* Input not invert */
IOCON_PIO_INV_DI |
/* Disables Open-drain function */
IOCON_PIO_OD_DI);
/* PIO0 PIN2 (coords: 8) is configured as SWD, SWDIO. */
IOCON_PinMuxSet(IOCON, IOCON_INDEX_PIO0_2, DEBUG_SWD_SWDIO);
const uint32_t DEBUG_SWD_SWDCLK = (/* Selects pull-up function */
IOCON_PIO_MODE_PULLUP |
/* Enable hysteresis */
IOCON_PIO_HYS_EN |
/* Input not invert */
IOCON_PIO_INV_DI |
/* Disables Open-drain function */
IOCON_PIO_OD_DI);
/* PIO0 PIN3 (coords: 7) is configured as SWD, SWCLK. */
IOCON_PinMuxSet(IOCON, IOCON_INDEX_PIO0_3, DEBUG_SWD_SWDCLK);
const uint32_t DEBUG_SWD_RESETN = (/* Selects pull-up function */
IOCON_PIO_MODE_PULLUP |
/* Enable hysteresis */
IOCON_PIO_HYS_EN |
/* Input not invert */
IOCON_PIO_INV_DI |
/* Disables Open-drain function */
IOCON_PIO_OD_DI);
/* PIO0 PIN5 (coords: 5) is configured as SYSCON, RESETN. */
IOCON_PinMuxSet(IOCON, IOCON_INDEX_PIO0_5, DEBUG_SWD_RESETN);
/* SWCLK connect to P0_3 */
SWM_SetFixedPinSelect(SWM0, kSWM_SWCLK, true);
/* SWDIO connect to P0_2 */
SWM_SetFixedPinSelect(SWM0, kSWM_SWDIO, true);
/* RESETN connect to P0_5 */
SWM_SetFixedPinSelect(SWM0, kSWM_RESETN, true);
/* Disable clock for switch matrix. */
CLOCK_DisableClock(kCLOCK_Swm);
}
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitI2CPins:
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
- pin_list:
- {pin_num: '20', peripheral: I2C0, signal: SCL, pin_signal: PIO0_14/ACMP_I3/ADC_2, mode: pullUp, invert: disabled, hysteresis: enabled, opendrain: disabled}
- {pin_num: '17', peripheral: I2C0, signal: SDA, pin_signal: PIO0_7/ADC_1/ACMPVREF, mode: pullUp, invert: disabled, hysteresis: enabled, opendrain: disabled}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitI2CPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
/* Function assigned for the Cortex-M0P */
void BOARD_InitI2CPins(void)
{
/* Enables clock for IOCON.: enable */
CLOCK_EnableClock(kCLOCK_Iocon);
/* Enables clock for switch matrix.: enable */
CLOCK_EnableClock(kCLOCK_Swm);
const uint32_t I2C_SCL = (/* Selects pull-up function */
IOCON_PIO_MODE_PULLUP |
/* Enable hysteresis */
IOCON_PIO_HYS_EN |
/* Input not invert */
IOCON_PIO_INV_DI |
/* Disables Open-drain function */
IOCON_PIO_OD_DI);
/* PIO0 PIN14 (coords: 20) is configured as I2C0, SCL. */
IOCON_PinMuxSet(IOCON, IOCON_INDEX_PIO0_14, I2C_SCL);
const uint32_t I2C_SDA = (/* Selects pull-up function */
IOCON_PIO_MODE_PULLUP |
/* Enable hysteresis */
IOCON_PIO_HYS_EN |
/* Input not invert */
IOCON_PIO_INV_DI |
/* Disables Open-drain function */
IOCON_PIO_OD_DI);
/* PIO0 PIN7 (coords: 17) is configured as I2C0, SDA. */
IOCON_PinMuxSet(IOCON, IOCON_INDEX_PIO0_7, I2C_SDA);
/* I2C0_SDA connect to P0_7 */
SWM_SetMovablePinSelect(SWM0, kSWM_I2C0_SDA, kSWM_PortPin_P0_7);
/* I2C0_SCL connect to P0_14 */
SWM_SetMovablePinSelect(SWM0, kSWM_I2C0_SCL, kSWM_PortPin_P0_14);
/* Disable clock for switch matrix. */
CLOCK_DisableClock(kCLOCK_Swm);
}
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitBUTTONsPins:
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
- pin_list:
- {pin_num: '3', peripheral: GPIO, signal: 'PIO0, 13', pin_signal: PIO0_13/ADC_10, identifier: S1, direction: INPUT, mode: pullUp, invert: disabled, hysteresis: enabled,
opendrain: disabled}
- {pin_num: '4', peripheral: GPIO, signal: 'PIO0, 12', pin_signal: PIO0_12, identifier: S2, direction: INPUT, mode: pullUp, invert: disabled, hysteresis: enabled,
opendrain: disabled}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitBUTTONsPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
/* Function assigned for the Cortex-M0P */
void BOARD_InitBUTTONsPins(void)
{
/* Enables clock for IOCON.: enable */
CLOCK_EnableClock(kCLOCK_Iocon);
/* Enables the clock for the GPIO0 module */
CLOCK_EnableClock(kCLOCK_Gpio0);
gpio_pin_config_t S2_config = {
.pinDirection = kGPIO_DigitalInput,
.outputLogic = 0U,
};
/* Initialize GPIO functionality on pin PIO0_12 (pin 4) */
GPIO_PinInit(BOARD_INITBUTTONSPINS_S2_GPIO, BOARD_INITBUTTONSPINS_S2_PORT, BOARD_INITBUTTONSPINS_S2_PIN, &S2_config);
gpio_pin_config_t S1_config = {
.pinDirection = kGPIO_DigitalInput,
.outputLogic = 0U,
};
/* Initialize GPIO functionality on pin PIO0_13 (pin 3) */
GPIO_PinInit(BOARD_INITBUTTONSPINS_S1_GPIO, BOARD_INITBUTTONSPINS_S1_PORT, BOARD_INITBUTTONSPINS_S1_PIN, &S1_config);
const uint32_t S2 = (/* Selects pull-up function */
IOCON_PIO_MODE_PULLUP |
/* Enable hysteresis */
IOCON_PIO_HYS_EN |
/* Input not invert */
IOCON_PIO_INV_DI |
/* Disables Open-drain function */
IOCON_PIO_OD_DI);
/* PIO0 PIN12 (coords: 4) is configured as GPIO, PIO0, 12. */
IOCON_PinMuxSet(IOCON, IOCON_INDEX_PIO0_12, S2);
const uint32_t S1 = (/* Selects pull-up function */
IOCON_PIO_MODE_PULLUP |
/* Enable hysteresis */
IOCON_PIO_HYS_EN |
/* Input not invert */
IOCON_PIO_INV_DI |
/* Disables Open-drain function */
IOCON_PIO_OD_DI);
/* PIO0 PIN13 (coords: 3) is configured as GPIO, PIO0, 13. */
IOCON_PinMuxSet(IOCON, IOCON_INDEX_PIO0_13, S1);
/* Disable clock for switch matrix. */
CLOCK_DisableClock(kCLOCK_Swm);
}
/***********************************************************************************************************************
* EOF
**********************************************************************************************************************/