/***********************************************************************************************************************
 * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
 * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
 **********************************************************************************************************************/

/* clang-format off */
/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v12.0
processor: MK22FX512xxx12
package_id: MK22FX512VLK12
mcu_data: ksdk2_0
processor_version: 12.0.0
pin_labels:
- {pin_num: '73', pin_signal: PTD0/LLWU_P12/SPI0_PCS0/UART2_RTS_b/FTM3_CH0/FBa_ALE/FBa_CS1_b/FBa_TS_b, label: LED_RED_L, identifier: LED_RED_L}
- {pin_num: '33', pin_signal: CMP2_IN1/PTA13/LLWU_P4/CAN0_RX/FTM1_CH1/I2C2_SDA/I2S0_TX_FS/FTM1_QD_PHB, label: LED_RED_R, identifier: LED_RED_R}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */
/* clang-format on */

#include "fsl_common.h"
#include "fsl_port.h"
#include "fsl_gpio.h"
#include "pin_mux.h"

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitBootPins
 * Description   : Calls initialization functions.
 *
 * END ****************************************************************************************************************/
void BOARD_InitBootPins(void)
{
    BOARD_InitPins();
}

/* clang-format off */
/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: '73', peripheral: GPIOD, signal: 'GPIO, 0', pin_signal: PTD0/LLWU_P12/SPI0_PCS0/UART2_RTS_b/FTM3_CH0/FBa_ALE/FBa_CS1_b/FBa_TS_b, direction: OUTPUT,
    gpio_init_state: 'true'}
  - {pin_num: '33', peripheral: GPIOA, signal: 'GPIO, 13', pin_signal: CMP2_IN1/PTA13/LLWU_P4/CAN0_RX/FTM1_CH1/I2C2_SDA/I2S0_TX_FS/FTM1_QD_PHB, direction: OUTPUT,
    gpio_init_state: 'true'}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */
/* clang-format on */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitPins
 * Description   : 
 *
 * END ****************************************************************************************************************/
void BOARD_InitPins(void)
{
    /* Port A Clock Gate Control: Clock enabled */
    CLOCK_EnableClock(kCLOCK_PortA);
    /* Port D Clock Gate Control: Clock enabled */
    CLOCK_EnableClock(kCLOCK_PortD);

    gpio_pin_config_t LED_RED_R_config = {
        .pinDirection = kGPIO_DigitalOutput,
        .outputLogic = 1U
    };
    /* Initialize GPIO functionality on pin PTA13 (pin 33)  */
    GPIO_PinInit(BOARD_INITPINS_LED_RED_R_GPIO, BOARD_INITPINS_LED_RED_R_PIN, &LED_RED_R_config);

    gpio_pin_config_t LED_RED_L_config = {
        .pinDirection = kGPIO_DigitalOutput,
        .outputLogic = 1U
    };
    /* Initialize GPIO functionality on pin PTD0 (pin 73)  */
    GPIO_PinInit(BOARD_INITPINS_LED_RED_L_GPIO, BOARD_INITPINS_LED_RED_L_PIN, &LED_RED_L_config);

    /* PORTA13 (pin 33) is configured as PTA13 */
    PORT_SetPinMux(BOARD_INITPINS_LED_RED_R_PORT, BOARD_INITPINS_LED_RED_R_PIN, kPORT_MuxAsGpio);

    /* PORTD0 (pin 73) is configured as PTD0 */
    PORT_SetPinMux(BOARD_INITPINS_LED_RED_L_PORT, BOARD_INITPINS_LED_RED_L_PIN, kPORT_MuxAsGpio);
}
/***********************************************************************************************************************
 * EOF
 **********************************************************************************************************************/