@ -14,11 +14,14 @@ mcu_data: ksdk2_0
processor_version : 12.0 .0
pin_labels :
- { pin_num : ' 45 ' , pin_signal : ADC0_SE4b / CMP1_IN0 / PTC2 / SPI0_PCS2 / UART1_CTS_b / FTM0_CH1 / FB_AD12 / I2S0_TX_FS / LPUART0_CTS_b , label : LED_BLUE , identifier : LED_BLUE }
- { pin_num : ' 46 ' , pin_signal : CMP1_IN1 / PTC3 / LLWU_P7 / SPI0_PCS1 / UART1_RX / FTM0_CH2 / CLKOUT / I2S0_TX_BCLK / LPUART0_RX , label : UART1_RX , identifier : UART1_RX }
- { pin_num : ' 49 ' , pin_signal : PTC4 / LLWU_P8 / SPI0_PCS0 / UART1_TX / FTM0_CH3 / FB_AD11 / CMP1_OUT / LPUART0_TX , label : UART1_TX , identifier : UART1_TX }
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS * * * * * * * * * * *
*/
/* clang-format on */
# include "fsl_common.h"
# include "fsl_port.h"
# include "pin_mux.h"
/* FUNCTION ************************************************************************************************************
@ -37,7 +40,11 @@ void BOARD_InitBootPins(void)
* TEXT BELOW IS USED AS SETTING FOR TOOLS * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
BOARD_InitPins :
- options : { callFromInitBoot : ' true ' , coreID : core0 , enableClock : ' true ' }
- pin_list : [ ]
- pin_list :
- { pin_num : ' 46 ' , peripheral : UART1 , signal : RX , pin_signal : CMP1_IN1 / PTC3 / LLWU_P7 / SPI0_PCS1 / UART1_RX / FTM0_CH2 / CLKOUT / I2S0_TX_BCLK / LPUART0_RX , open_drain : enable ,
pull_select : up , pull_enable : enable }
- { pin_num : ' 49 ' , peripheral : UART1 , signal : TX , pin_signal : PTC4 / LLWU_P8 / SPI0_PCS0 / UART1_TX / FTM0_CH3 / FB_AD11 / CMP1_OUT / LPUART0_TX , direction : OUTPUT , open_drain : enable ,
pull_select : up , pull_enable : enable }
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS * * * * * * * * * * *
*/
/* clang-format on */
@ -50,6 +57,45 @@ BOARD_InitPins:
* END * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
void BOARD_InitPins ( void )
{
/* Port C Clock Gate Control: Clock enabled */
CLOCK_EnableClock ( kCLOCK_PortC ) ;
/* PORTC3 (pin 46) is configured as UART1_RX */
PORT_SetPinMux ( BOARD_INITPINS_UART1_RX_PORT , BOARD_INITPINS_UART1_RX_PIN , kPORT_MuxAlt3 ) ;
PORTC - > PCR [ 3 ] = ( ( PORTC - > PCR [ 3 ] &
/* Mask bits to zero which are setting */
( ~ ( PORT_PCR_PS_MASK | PORT_PCR_PE_MASK | PORT_PCR_ODE_MASK | PORT_PCR_ISF_MASK ) ) )
/* Pull Select: Internal pullup resistor is enabled on the corresponding pin, if the
* corresponding PE field is set . */
| ( uint32_t ) ( kPORT_PullUp )
/* Open Drain Enable: Open drain output is enabled on the corresponding pin, if the pin is
* configured as a digital output . */
| PORT_PCR_ODE ( kPORT_OpenDrainEnable ) ) ;
/* PORTC4 (pin 49) is configured as UART1_TX */
PORT_SetPinMux ( BOARD_INITPINS_UART1_TX_PORT , BOARD_INITPINS_UART1_TX_PIN , kPORT_MuxAlt3 ) ;
PORTC - > PCR [ 4 ] = ( ( PORTC - > PCR [ 4 ] &
/* Mask bits to zero which are setting */
( ~ ( PORT_PCR_PS_MASK | PORT_PCR_PE_MASK | PORT_PCR_ODE_MASK | PORT_PCR_ISF_MASK ) ) )
/* Pull Select: Internal pullup resistor is enabled on the corresponding pin, if the
* corresponding PE field is set . */
| ( uint32_t ) ( kPORT_PullUp )
/* Open Drain Enable: Open drain output is enabled on the corresponding pin, if the pin is
* configured as a digital output . */
| PORT_PCR_ODE ( kPORT_OpenDrainEnable ) ) ;
SIM - > SOPT5 = ( ( SIM - > SOPT5 &
/* Mask bits to zero which are setting */
( ~ ( SIM_SOPT5_UART1TXSRC_MASK ) ) )
/* UART 1 transmit data source select: UART1_TX pin. */
| SIM_SOPT5_UART1TXSRC ( SOPT5_UART1TXSRC_UART_TX ) ) ;
}
/***********************************************************************************************************************
* EOF
